• Vinit kumar
• Prof. Santosh Onker

This article introduces a voltage level shifter (LS) that is quick and extremely power-efficient. A new regulated cross-coupled (RCC) pull-up network is used to increase switching speed and the Dynamic power usage has been drastically cut. The proposed (LS) can raise nominal supply voltage levels from input signals with voltage levels significantly lower than a MOS device's threshold voltage. Due to its extremely low element count and ultra-low power consumption, the proposed LS is well suited for low-power applications including wireless sensor networks and implanted medical devices. The suggested circuit can convert up input voltage levels as low as, according to the results of the post-layout simulation in a conventional 0.18-m CMOS . The suggested circuit may convert up input voltage levels as low as 80 mV, according to the results of the post-layout simulation in a conventional 0.18-m CMOS technology. the force For an input frequency of 1 MHz and low/high supply voltages of 0.4/1.8 V, the suggested level shifter's dissipation and propagation delay are 123.1 nW and 23.7 ns, respectively.

Subthreshold circuit, dual-supply, level shifter, differential cascade voltage switch, low power

"A Low-Power and High-Speed Voltage Level Shifter Based on a Regulated Cross-Coupled Pull-Up Network", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.10, Issue 2, page no.c160-c163, February-2023, Available :http://www.jetir.org/papers/JETIR2302227.pdf

"A Low-Power and High-Speed Voltage Level Shifter Based on a Regulated Cross-Coupled Pull-Up Network", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.10, Issue 2, page no. ppc160-c163, February-2023, Available at : http://www.jetir.org/papers/JETIR2302227.pdf