• Ranganatha
• Dr. K. V. Sharma

In the present study an effort has been made to study the microstructure, hardness and tensile properties of aluminium 7075 Metal Matrix composites reinforced with Graphite (Gr), Egg Shell Particulates (ESP) and Titanium carbide (TiC). Fabrication of hybrid Al7075 was carried out by stir casting technique. Percentage of TiC particles were varied from 2 wt. % to 6 wt. % in steps of two by keeping constant 1 wt. % of graphite and Egg Shell particulate. The prepared samples were subjected to mechanical testing like tensile and hardness as per ASTM standards. It was observed that as the wt. % of TiC increases there is a great improvement in the mechanical properties of Hybrid Al7075 MMC. Also Microstructural study was carried out by using inverted metallurgical microscope to study the dispersion of reinforcement particles in the Al7075 matric phase.

Al7075, Metal Matrix Composites, Egg Shell Particulates, Graphite Titanium Carbide

"Study of influence of Titanium Carbide in Aluminium 7075 Metal Matrix Composites Reinforced with Titanium Carbide, Graphite and Egg Shell Particulates", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.10, Issue 3, page no.e262-e265, March-2023, Available :http://www.jetir.org/papers/JETIR2303432.pdf

"Study of influence of Titanium Carbide in Aluminium 7075 Metal Matrix Composites Reinforced with Titanium Carbide, Graphite and Egg Shell Particulates", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.10, Issue 3, page no. ppe262-e265, March-2023, Available at : http://www.jetir.org/papers/JETIR2303432.pdf