• H. Praveen
• Dr.U.K.Choudhury

The technical paper proposed here covers the conceptual design, detailed design, simulation, and manufacturing aspects of a single stator sand witched between double rotor with axial-flux type construction with embedded permanent-magnet to form an Axial Flux generator. In addition, to magnets with magnetisation along the generator axis, the proposed structure is provided with magnets which were magnetized circumferentially i.e along thickness and pasted on the rotor surface. The electromagnetic design of the axial-flux generator was evaluated against the technical specification and design parameters. For designing the Axial Flux Generator the number of poles and coils, as well as the outer diameter was decided based on the frequency , Voltage and power output. It may be mentioned here that the axial length of the new generator is shorter compared to conventional generator. Simulations were carried out by comparing the generators parameters and out output such as air-gap flux density, torque, electromotive force, Current and power output etc. Testing was carried out on the prototype. It may be mentioned that the output of the calculated results were compared with the tested values. They compared reasonable well and we could find some differences due to air gap variation.

Axial flux permanent magnet wind generator(AFPMWG), Axial flux, Simulation, Generator.

"Design And Development of Axial Flux Compact PM Wind Generator", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.10, Issue 11, page no.a452-a462, November-2023, Available :http://www.jetir.org/papers/JETIR2311060.pdf

"Design And Development of Axial Flux Compact PM Wind Generator", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.10, Issue 11, page no. ppa452-a462, November-2023, Available at : http://www.jetir.org/papers/JETIR2311060.pdf