• Dolly Sharma
• Ashish Dubey

A voltage-controlled oscillator (VCO) made of hybrid CMOS is presented in the study; it has a low power consumption and a linear response across a broad power range. field-effect transistors based on carbon nanotube hybrid voltage CMOS. In this study, controlled ring oscillators are introduced. These designs use the capabilities of the CNTFET in addition to the benefits of high-frequency performance without sacrificing power consumption. have a significant impact on the three-stage ring oscillator's oscillation frequency when supplied at 0.7V. An output frequency regulator was used. The frequency of CMOS voltage-controlled oscillators (VCOs), power dissipation, and hybrid VCOs are examined. Without the necessity for a resistor or broad device, Combine the responsiveness of CMOS and CNTFET outputs using a CMOS-VCO hybrid. Excellent linearity is shown by the circuit when compared to a CMOS pure circuit with tuning and control voltages of 0.7V.

Voltage Controlled Oscillator, Operating Frequency, CMOS, Power consumption, Cadence.

"Low Power Voltage Controlled Oscillator using Hybrid CMOS CNTFET Technology ", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.11, Issue 2, page no.d77-d81, February-2024, Available :http://www.jetir.org/papers/JETIR2402311.pdf

"Low Power Voltage Controlled Oscillator using Hybrid CMOS CNTFET Technology ", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.11, Issue 2, page no. ppd77-d81, February-2024, Available at : http://www.jetir.org/papers/JETIR2402311.pdf