• MUNISH BABORIA
• MUNISH BABORIA
• GURDEEP SINGH BALI
• SANJEEV GUPTA

Today's composite materials are often optimized to achieve the right balance of properties in an application. As the properties of composites are affected, significant efforts have been made to improve the properties of these materials by modifying them at the nanoscale. For this reason, composite materials are filled with nanomaterials to achieve better performance. In this research, clay-epoxy nanocomposites are produced from different materials and have different properties. Tensile and flexural strength were evaluated on a universal testing machine, and hardness was evaluated on a Vickers hardness tester. The best results of strength and hardness were obtained using 2% by weight nanoclay composition. Then, different amounts of TiO2 were added to fix 2 wt.% nanoclay. It was observed that the prepared epoxy hybrid nanocomposites had different properties.

Clay, epoxy, elastic modulus, flexural strength, nanocomposites, tensile strength, titanium oxide(TiO2)

"Estimation of Thermal and Mechanical Properties of Clay and Titanium Oxide Epoxy Hybrid Nanomaterials", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.11, Issue 3, page no.f645-f654, March-2024, Available :http://www.jetir.org/papers/JETIR2403577.pdf

"Estimation of Thermal and Mechanical Properties of Clay and Titanium Oxide Epoxy Hybrid Nanomaterials", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.11, Issue 3, page no. ppf645-f654, March-2024, Available at : http://www.jetir.org/papers/JETIR2403577.pdf