• Amith P
• Ashok D K
• Bhojraj Kotin
• Dayanand S
• Jegadeeswaran N

In this present work the design and fabrication of 10 Ton Hydraulic press machine. A Hydraulic press is a machine using a hydraulic cylinder to generate a compressive force, which works on Pascal’s principle. Frame, hydraulic cylinder, piston arrangement and the hydraulic circuit are the main components of the hydraulic press. In this project hydraulic press machine is designed by the design procedure and fabricated. Hydraulic press is analyzed to improve their performance for press working operation. Using the optimum resources possible in designing the hydraulic press components can effect reduction in the cost by optimizing the weight of material utilized for building the structure. An attempt has been made to reduce the volume of material. A 10-ton hydraulic press was designed, constructed and tested using locally sourced materials. The principal parameters of the design included the maximum load, the distance the load resistance has to move, the system pressure, the cylinder area and the volume flow rate of the working fluid.

Maximum load, load resistance, system pressure, cylinder area, hydraulic circuit.

"Fabrication of Hydraulic Press Machine", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 5, page no.598-601, May-2019, Available :http://www.jetir.org/papers/JETIRBZ06092.pdf

"Fabrication of Hydraulic Press Machine", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 5, page no. pp598-601, May-2019, Available at : http://www.jetir.org/papers/JETIRBZ06092.pdf