• Prajakta P. Kachare
• Aditya R. Wankhede
• Vishal C. Momale

Base Frame is a structural assembly consisting of beams of various cross sections and dimensions. The base frame is subjected to gravitational loading of all the components mounted viz. Compressor, Air Receiver vessel etc. The frame discussed in this report was designed with conventional CAD design practices and then analyzed statically with FEA software. The analysis was carried out to determine the induced stresses and the deflections at various locations on proposed frame. The structure was optimized to reduce weight. Mainly frame is designed to mount compressor and other machine component to mount. It must be able to control, similar to shock absorber, the motion resulting from load condition, such as running in start condition. For excitation of small amplitude over the higher frequency range, a compliant but highly damped mount is required for vibration isolation.

FEA analysis, Base Frame, Modal analysis

"Basic Optimization of Compressor Frame", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 1, page no.113-116, January-2019, Available :http://www.jetir.org/papers/JETIRW006024.pdf

"Basic Optimization of Compressor Frame", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 1, page no. pp113-116, January-2019, Available at : http://www.jetir.org/papers/JETIRW006024.pdf